BLTCC - EPOXY PRIMER COMPONENT B, 101-147B
- MSDS: BLTCC
- Manufacturer: CORONADO PAINT COMPANY
- Product Name: EPOXY PRIMER COMPONENT B, 101-147B
- National Stock Number: 8010-00N017707
Product Identification
Product ID:EPOXY PRIMER COMPONENT B, 101-147B
MSDS Date:12/16/1987
FSC:8010
NIIN:00N017707
MSDS Number: BLTCC
Responsible Party
EDGEWATER, FL 32032
US
Emergency Phone: 904-428-6461
Info Phone: 904-428-6461
Cage: 33200
Contractor
Telephone: 904-428-6461
Cage: 33200
Ingredients
PIGMENTS
Fraction By Weight: 4.6%
VEHICLE (HYDROCARBON)
Fraction By Weight: 22.9%
XYLENE
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 72.5%
OSHA PEL 100 PPM;150 PPM STEL
ACGIH TLV: 100 PPM;150 PPM STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN:PROLONGED OR REPEATED EXPOSURE
MAY CAUSE IRRITATION. EYE:MAY CAUSE IRRITATION & REDNESS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:SKIN:REMOVE EXCESS, WASH W/SOAP & COPIOUS WATER. EMULSIFY
W/VINEGAR (5% ACETIC ACID) IF NECESSARY. RINSE W/WATER. EYE:RINSE
W/WATER FOR AT LEAST 15 MINUTES. SEE MD IF IRRITATION OR REDNESS
PERSISTS. I NGEST:GET MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTIFICIAL RESPIRATION). CALL MD .
Fire Fighting
Flash Point Method:SCC
Flash Point:75.0F,23.9C
Lower Limits:1.1
Upper Limits:7.5
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL & FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:VAPORS MAY FORM EXPLOSIVE MIXTURES W/AIR.
Accidental Release
Spill Release Procedures:BROADCAST VERMICULITE OR OTHER ABSORBANT
MATERIAL. SCOOP UP. SCRUB W/5% ACETIC ACID TO EMULSIFY. RINSE
W/WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE IN UNVENTILATED OR
EXCESSIVELY HOT (OVER 120 F) AREAS. USE GOOD HOUSEKEEPING.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE SPECIFIED BY MANUFACTURER.
Ventilation:LOCAL EXHAUST:GOOD GENERAL VENTILATION USUALLY ADEQUATE.
Protective Gloves:POLYETHYLENE OR RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:CLEAN, LONG LEG & LONG SLEEVE WORK CLOTHES.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:250F,121C
Vapor Pres:17
Vapor Density:3.2
Spec Gravity:0.91
Evaporation Rate & Reference:1.15 (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLOUDY AMBER LIQUID; ODOR CHARACTERISTIC OF
SOLVENTS.
Percent Volatiles by Volume:76.44
Stability
Stability Indicator/Materials to Avoid:NO
WATER OR OTHER HYDROXYL CONTAINING MATERIALS.
Stability Condition to Avoid:DO NOT MIX WATER W/UNCURED MATERIAL.
Hazardous Decomposition Products:NONE
Disposal
Waste Disposal Methods:PLACE IN CLOSED CONTAINER & REMOVE TO APPROVED
LANDFILL OR BURN IN ADEQUATE INCINERATOR. DISPOSAL MUST BE IN
ACCORDANCE W/FEDERAL, STATE & LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.